|
| I am still trying to get a Field IQ rate and section control to work. The section part works, but I am not getting the rate part to work. FM-750 to a Raven 450 harness. I was wondering if anyone knew the pins the flow controller used so I could check if it is getting power. I read another post where they said everything worked with the Raven controller but not with the Field IQ, turned out it was corrosion. I do see a little corrosion in the coupler. I may have some settings wrong also. The flow meter is giving me readings as I was able to calibrate it. Nothing from the controller. I didn't know whether to add to my old post, as it was getting pretty long. I appreciate all the help I have got.
Thanks
Edited by gw73 6/29/2024 07:48
| |
|