Jeffersonville, OH | cprogers6468 - 3/30/2024 00:34
Been trying to get my agra gps green bridge to work but since this machine has had a trimble system overlayed and not plugged into the canbus it doesn't seem like that will work, they also changed the valve to trimble as well. Its 4200 to take it back to stock valve to maybe get the green bridge to work. To unlock the 750 to higher accuracy is spendy and subscription on top of it. And I don't really need an extra monitor in there. I already have a 2630 using for air seeder and 6000 on sf3. Just wondering if the ATC 300 would work? I know it sounds dumb because there is already a valve on there but my other options are spendy too.
Or you could Talk to Reichardt and see if they can make a system work with the valve you have installed. From my discussions with them , they don't seem to care about the valve.
The valve you posted pictures of on your tractor a few days ago didn't look like a Trimble valve to me, but maybe I missed a picture.
Chris |
Jd ATC 300 on 2011 challenger 945c?
