|
| Upgraded from WAAS to centerpoint RTX this year. We have an FM-1000, AG 25, and an E-Z steer on a white 145. Last year, everything worked fine,steering was straight for WAAS. Bought center point RTX this spring, changed the frequency and baud rate numbers. Check with Trimble and confirmed all the settings are correct. Did some demo planting and the steering has a hard time locking onto the A-B line. We are constantly weaving across the A-B line. Recalibrated the E-Z steer, changed the aggression percentage and checked all our measurements for the tractor and planter. The main reason for us getting the centerpoint RTX is the drifting with WAAS for our section controls. Any help would be helpful. Thanks. | |
|
Center point RTX with E-Z Steer
