|
Clinton County, Michigan | In the NTRIP app, under Receiver Settings - Reported Location, is it set to "Get from External Receiver"? If it's manual or something else and several miles away that can effect the satellites used and ability to get RTK fixed.
Are you getting RTK Float, or is it staying on DGPS?
The difference in satellite numbers is odd, but maybe 1 or the other is using a different NMEA stream to determine satellites tracked vs satellites used.
When you switch mountpoints, it would be a good idea to power-cycle the receiver so it starts fresh, rather than trying to adapt. You might need to change a setting in the receiver in order to tell it you are switching between RTCM3.1, 3.2, and CMR. If it stays on DGPS it likely isn't understanding the corrections at all. If it goes to RTK Float, then it is, but something still preventing it from getting full accuracy. | |
|
372 RTK + NTRIP on MN Cors not seeing Glonass
