|
Kendall County, IL | I pulled my pull sprayer out of the barn to do a test spray, raven 440 shows 0 rate when spraying. Flowmeter spins freely but there is no voltage between any pins on flow meter harness going to console. All cables, flow meter, and meter valve were new last year and working when parked for the winter. With a jumper wire I shorted 2 o'clock to 6 o'clock and nothing registered on console with meter cal at 1 and everything on. All calibrations are set on console and speed reading is good too. This is a basic 3 section sprayer with raven 440, raven meter, raven meter valve, and raven boom valves, again all new last year. I think I need to start at the console harness and work back before I throw a flow meter at it.
Does anyone have a pinout diagram for my console harness, 111-5017-085. Google isn't much help. | |
|