|
SW WI | Here is the article you would need to read to reconfigure the gps. As stated in the article, "The GPS 6000/7000/6500/7500 are defaulted to 115,000 baud rate on the connected serial port
This baud rate is too high for Legacy displays to receive GPS and must be reconfigured in order for the display to receive position fix." These would have to be programmed with a newer display or novatel connect to make the baud rate correct for the insight screen. The insight is old enough that it can't be done through the monitor.
You would need a mobile logging cable that powers up the ag leader receiver via Port B and a null modem cable as well as a newer display to configure port A for the insight. Otherwise find a Ag Leader dealer to help you with this process.
https://portal.agleader.com/community/s/article/1233
Edited by andrewsfarmandag 4/18/2024 23:53
| |
|