Viewing a thread - Raven console cable pinout - no voltage to flowmeter TEDBEAR!

Forums | Classifieds (7) | Skins | Language

You are logged in as a guest. ( logon | register )

Raven console cable pinout - no voltage to flowmeter TEDBEAR!	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

ILSODGRWR

Posted 4/19/2024 11:57 (#10712703 - in reply to #10712670)
Subject: RE: Moving on

Kendall County, IL

tedbear - 4/19/2024 11:17

I believe you have found the troublesome spot. Internal breaks are difficult to see inside the CoAx cable. If this failed for you once, it may have been due to stress on that section of the cable and will likely happen again. Although unlikely, I've seen the round Conxall connectors misaligned.

Thank you for the help Tedbear, new cable is ordered

Raven console cable pinout - no voltage to flowmeter TEDBEAR! - ILSODGRWR : 4/18/2024 15:15
- May not like my suggestions but just do it - tedbear : 4/18/2024 18:03
  - RE: Raven console cable pinout - no voltage to flowmeter TEDBEAR! - ILSODGRWR : 4/18/2024 18:07
  - RE: May not like my suggestions but just do it - ILSODGRWR : 4/19/2024 06:04
    - Moving on - tedbear : 4/19/2024 07:09
      - RE: Moving on - ILSODGRWR : 4/19/2024 08:49
        
        RE: Moving on - tedbear : 4/19/2024 09:44
        
        RE: Moving on - ILSODGRWR : 4/19/2024 09:53
        
        RE: Moving on - ILSODGRWR : 4/19/2024 10:15
        
        RE: Moving on - tedbear : 4/19/2024 11:17
        
        RE: Moving on - ILSODGRWR : 4/19/2024 11:57
- Still not working with new flowmeter... - ILSODGRWR : 4/25/2024 08:50
  - Use 1450 - tedbear : 4/26/2024 06:51

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)