|
| I have two CIH tractors with NAVs set up to send GPS messages to other monitors. They are connected to the harness by the nav controller (Magnum tractors have the Nav in a panel behind the seat, Steiger is under the buddy seat). Then you use the pro700 to set which messages you want sent. I'm not familiar with Deere, but this works well for Precision Planting and also Ag Leader displays. I use cellular RTK from MNCors.
Also be aware that if you get GPS through the NAV, it will send the position relative to the fixed axle of your machine....so, remember that when you're trying to calibrate your planter offsets.
You'd probably get better replies if you had a more specific title to your original post.
Edited by chris dds 4/20/2024 05:44
| |
|