|
| Hello,
for my cousin I try to connect a trimble FMX with an NTRIP network.
Our system:
Ntrip client is install on a raspberry PI B(RPI) it's : POSIX ntripclient. It was developed by BKG (a german governement agency who designed NRIP protocol ).
We use a cellular with USB cable to connect the RPI to internet.
The NTRIP Network is Centipede .
We supply the RPI by FMX USB port.
RPI is connect to fmx by a USB/serial adaptator and serial cable cabling like that:
Today we remove the internal radio, to evite some perturbation with it.
FMX config:
Here, I have my firsts Questions:
Were is the firmware version?
Is it a compatible version to receive RTCM on D port ?
This is an unlocked RTK or not?
In setup screen we select centerpoint RTK:
I have this error,it's normal I remove the internal radio:
In Agremote, I selected:
RTK source
Port D : Input RTCM 9600,Output none 9600
We can see I havn't any Corrections.
I look port D diagnostics, I see:
It's seem good.
I suppose I forget something somewhere, but I don't know what.
You're very welcome for your help, thank you.
 (connection (full).jpg)
Attachments
----------------
 connection (full).jpg (10KB - 85 downloads)
| |
|
trimble FMX setting with an NTRIP
