Posted 4/26/2024 13:30 (#10718803) Subject: replacing 460 raven controller with an ez boom
I installed and ez boom in place of a 460 raven controller on a spx 4260 case ih sprayer.
I used the factory harness from the A post that went to the rear of the 460 and plugged the harness into the ez boom.
when I turn any of the ez boom switches on, all my valves move at the same time on the boom.
Do I need a diode jumper cable? part #69982 from trimble? Will this fix the problem? Any good help is appreciated.
replacing 460 raven controller with an ez boom
