AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

what control system to plug into this 3pt sprayer system?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
neo_ag
Posted 4/28/2024 05:58 (#10720807 - in reply to #10720397)
Subject: RE: oldest/cheapest control system to plug into this 3pt sprayer system?



northeast ohio
+1 to the Powell connector and the tractor side components for aCFX750.

However, what’s on the other end of the harness is important. My guess from the photos is the rate and section module is missing but may just be tucked away in a protected spot. The Powell connector in photos 1 and 2 connects to the Deutsch plugs in photo 4. I can’t read the cable number, but follow it to find a Cinch module box with PN 75774-00 or -01. If you do locate it, look over the wiring closely for sun damage and cracking. It also appears that the valve motors have been removed and the ports covered with electric tape have. It may be cheaper to purchase another valve bank than individual parts of an off brand. Might be Tee-Jet?. The upside is it appears to have the Raven flow valve and meter still installed.



Edited by neo_ag 4/28/2024 06:27
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)