|
Qulin, MO | I’m running a Viper Pro with Smartrax in my Spra-Coupe 4460.
Running in 30 inch beds my guidance line is right on going one direction but about 1.25 feet off where it should be going the other direction. I want to do a calibration on it to try and correct this but I haven’t figured out where to do this.
From what I have read I need to press the Smartrax Status Indicator box to get to the calibration screen but my Viper Pro screen doesn’t have this box.
My questions are if I am correct that this is where the calibrations are located, should my screen have the Smartrax Status Indicator box, and if so how do I get it to show up there?
 (IMG_9720 (full).jpeg)
 (IMG_9722 (full).jpeg)
Attachments
----------------
 IMG_9720 (full).jpeg (92KB - 54 downloads)
IMG_9722 (full).jpeg (64KB - 47 downloads)
| |
|
Viper Pro w/ Smartrax
