|
Carman Manitoba | Hello all.
So here is what I am trying to do.
Field IQ with 2 RCM (one for each tank and meter auger)
I mod hooked to electric clutch,bin level, metering auger shaft. The other one bin level, metering auger, fan and implement switch.
I can get both bin sensors to read. I can't get fan, implement switch or augers to read.
I have voltage at all of them
The auger shaft sensors are topcan, fan is bourgault and lift switch is ag tropics.
I fail the calibration because it won't pick up shaft sensors.
I have double checked wiring diagrams for airseeder and a is correct.
Anyone have a suggestion?
Thank you
(20240507_151910 (full).jpg)
Attachments ---------------- 20240507_151910 (full).jpg (52KB - 66 downloads)
| |
|