|
| Yes, norac has a 6 pin duetch adapter to a 4 pin round. That 4 pin round plugs into one leg of a can Y, with the other leg having a terminator. That Y is fed by another can Y, with the second leg in that one running to the liquid product module.
I'm fairly confident that is hooked up correctly, as it is the same as other implements I run with two modules, and don't have issues with those. I feel confident that I don't have a bad terminator, as the liquid module works correctly and has been spraying for several days now.
At this point I am leaning heavily towards new software being needed in the UC5 controller (maybe it needs different software for Ag Leader Integra then InCommand?) or my controller being fried. Everything I have checked as far as wiring seems to check out. | |
|