|
Leamington canada | I recently bought a used setup for steering my sprayer, and am having a little hiccup trying to perform the setup, it is asking me to use the foot switch to move on to the next stage of the setup wizard but there isn’t a foot switch for it I was told I didn’t need one.
I found the “remote switch” connector which is a 3 pin connector the previous owner had cut some wires off to make a more remote switch by the looks of it. I tried jumping the wires and no luck, tried ground on one and no luck, setup wizard wont let me advance.
Cruizer 2 is version 3.5.0
Smartrax md 1.1.08
Attached is the connector and wires I’m talking about and the setup screen issue, any help is much appreciated, thanks!
Edited by Mikefox95 5/10/2024 16:48
 (IMG_7616 (full).jpeg)
 (IMG_7615 (full).jpeg)
Attachments
----------------
 IMG_7616 (full).jpeg (130KB - 159 downloads)
IMG_7615 (full).jpeg (106KB - 147 downloads)
| |
|
Raven cruizer 2 & smartrax setup issue
