|
| When I get a chance I'll try to remember the next time it's on the bucket. Basically the mount is just two pieces of heavy angle iron welded together with just enough space between them to slip on the bottom edge of the bucket. Top flat edge has a couple of hooks welded on. I hold the bracket on the edge of the bucket with short pieces of chain in the hooks and a couple of ratchet chain tighteners hooked onto the top bucket edge. When I bought the digger I also bought the skid steer mount as my tractor is set up for skid steer attachments. Problem was it set straight out in front so I couldn't see what I was doing. Stole the swivel from that mount for the loader bucket mount that sets on the left edge of the bucket so now I can see the auger. Hope that helps. I think there are some mounts made to adapt a hydraulic digger to a bucket. | |
|