|
Eastern Ontario | Yes, those are the cables. I have called many dealers looking for pinouts and finally found the correct CAN cable at J&S Repair in Minnesota. The issue that was baffling me (and Ag Leader tech support) is that AutoFarm used a different pin arrangement on the CAN bus. Essentially the pins that Ag Leader ties into were on the CAN out on the AutoFarm system. An adapter harness could be made, but now my customer has nice clean factory cables.
Also, the Integra had no issues updating firmware from that used on the old ATC display. | |
|
Ontrac2 to Integra with Autofarm Cables
