|
| My 115-0171-085 cable has the switched power in pin 14. I hooked everything up and updated to 8.1 and the RSCM is recognized. The main issue I have now is I can't get the Satellites graphic to turn green, it stays yellow. In the older version 7.79 I went through and turned on all the satellites, 8.1 gives me auto or I can pick one. I don't know if this is what is causing my problem. It used to turn green within a minute or two. Il do a little more research here.
Edited by gw73 6/26/2024 11:38
 (console (full).png)
Attachments
----------------
 console (full).png (48KB - 23 downloads)
| |
|
Field IQ Rate and Section Control
