|
| We now have an option that does not require a sensor.
It takes a different approach. The POINT scale indicator listens to the ISOBUS can network of the tractor and knows when the tractor is unloading by observing when the operator turns on and off the PTO switch. We now also listen to the NMEA location messages from an integrated receiver on the tractor. Location data is tagged to the load ticket in REAP, and it is also stored in the internal memory of the POINT indicator.
No extra sensors required for this option. We call it HarvestMate ISO. Plug and play directly to the IBBC 9 pin connector on the back of your tractor.
 (IMG_9154 (full).jpeg)
Attachments
----------------
 IMG_9154 (full).jpeg (79KB - 24 downloads)
| |
|
Scale-tec point newby
