|
Faunsdale, AL | I have never set or used any of the acreage or volume functions. Like I said above, I’ve just set the rates and sprayed, never even effectively changed the pressure/rate manually. Didn’t attempt it once I discovered it would spray out sitting still. I suppose that is because of having a fairly high minimum flow set?
I do get a high rate warning when I shut off 4 out of 5 boom sections and coming out of a turn the rate is noticeably high for a second or two.
I’m off to reinstall the 460 console so I can at least use the rocker switch to manually set the throttling valve. It’s possible it might go back to working in auto! | |
|
Raven 460 manual rate control
