|
| nsk - 7/4/2024 08:05
There is a cure for the hyd condition you describe if you read the owners manual.
I thought there should be, was not my tractor when it had a loader put on, just used at the auction to load with. Additional thought, clutch is fine for field work or a limited loader work, but I think for loading bales or using it all day it will be hard on knees, better shifting trany then the 2-135 suggested above for a loader though, 2-135 has those steel plates to guide the shifting and the forward reverse speeds are not lined up so will need to go sideways in the shift pattern (as I remember if it is the same as a 140).
Edited by WCWI 7/4/2024 15:12
| |
|