Winkler, Manitoba Canada | Jrditchdigger - 7/6/2024 06:19
Recently purchased a planter that has 3/4” hose and tips for the raise and lower on the DB bar. Does anyone make an o-ring style tip that will fit on the 3/4” hose and fit into standard (1/2” I believe) SCV valves? Obviously other ways to solve this problem but just changing tips would be the easiest. Can find NPT tips but not the o-ring type.
What size of ORB fitting is on the hose? Pioneer lists two sizes of 1/2" male tips with ORB thread, 3/4-16 and 7/8-14. I would think dealer would have them available....if not online. |
Source for Pioneer style hyd couplers
