|
Eastern kansas | I can’t get the #4 section to shut off. The white wire is keeping a constant 12ish volts. I read through a couple old post about a little red box that controls the valves but on those systems they didn’t have the aim command. Does that matter? I have a red cylinder type thing hanging under my aim command modules and was wondering if that’s what I should replace? Thank you
In the last picture is the power relay(2) the same as the module in the 2nd picture?
Edited by haystack91 7/6/2024 16:39
(IMG_3670 (full).jpeg)
(IMG_3668 (full).png)
(IMG_3669 (full).jpeg)
Attachments ---------------- IMG_3670 (full).jpeg (182KB - 32 downloads) IMG_3668 (full).png (200KB - 34 downloads) IMG_3669 (full).jpeg (129KB - 40 downloads)
| |
|