KY | Thanks for all the responses. After the sun got off the roof I got up there with a driver bit (by hand, not with a driver) and checked every screw in that top row of the lower section. I found 5 total that weren't snug, I backed them off, siliconed under them all and ran them back down snug with the exception of the two in the trouble spots, I did the same but nothing really to bite into so pushed them down and then siliconed them again. Remnants of Beryl will be here tues evening/wed morning, going to put plastic with paper towels on top under the trouble spots in the attic to catch and identify if it's leaking still then go from there. Will update on a new thread once I learn something. |