|
SEQ, Australia | Hi neo_ag, sorry for the late response - I've been in the field for a few days. Yes, we are running a few FieldLevelII systems with the NAV-900 Receivers now, and have been since 2023. We make up our own custom harness solution and masts for them and use the Ag820 radios for both 900Mhz and 450-470Mhz operation. We also use the new R750 base stations to get the best accuracy out of the setup, but it is possible to use other multi-constellation bases. The FMX/TMX displays can run external GPS receivers, so we don't unlock the internal ones, or if one is unlocked, we continue using it for autosteer, and run single/dual NAV-900's for the levelling side. So far we have found the NAV-900's to be an excellent receiver for this application. We have a lot of customers that are doing bankless irrigation work, where the grade tolerances on the fields are quite small, and the old internal receivers are just not accurate enough on GPS/Glonass satellites. So far we have found that we don't need to run VerticalPoint with these, but time will tell if this remains the case.
 (Screenshot 2025-02-06 115718 (full).png)
Attachments
----------------
 Screenshot 2025-02-06 115718 (full).png (113KB - 14 downloads)
| |
|
Questions for Trimbleguy
